Cable, electrical, foam pipe / Cables & wires / Power cables for stationary laying / Power cables for stationary laying up to 3 kV inclusively

NYM, 0,66; 1 kV

Power cables with copper conductors insulated by PVC and with PVC sheath.

NYM-0,S07VV-R 0,66; 1 kV

Power cables with copper conductors insulated by PVC and with PVC sheath with low flammability.

Construction:

1. Current-carrying conductor is made of copper, solid or stranded conductor, round- or sector-shaped, of class 1 or 2 as per GOST 22483.

2. Insulation is made of PVC compound. Insulated conductors of multi-conductor cables have distinctive color. Insulation of neutral conductors is performed in blue color. Insulation of grounding conductors is performed in two colors (green and yellow).

3. Twist - insulated conductors  of two-, three-, four- and five conductor cables are twisted; two conductor cables have uniform conductors; three-, four- and five conductor cables have all uniform conductors or one conductor of lesser section (grounding or neutral conductor).

4. Inner sheath is made of PVC compound and unvulcanized rubber compound, in NYM-0,S07VV-R cables - flame-resistant unvulcanized rubber compound with layer thickness of at least 0.1 mm, or of flame-resistant PVC compound.

5. Outer sheath is made of PVC compound, in NYM-0,S07VV-R cables - flame resistant PVC compound.

Application:

– For power transmission and distribution in fixed plants for rated alternating voltage of 660 V and 1000 V with frequency of 50 Hz.
– For installation in dry and damp production spaces, on special cable racks, in blocks and for outdoor installation. For power supply to electric plants which need cable glands at bushing.

NYM type cables are flame-retardant if single; NYM-0,S07VV-R type cables are flame-retardant if bunched.

NAYY 0,66; 1 kV

Power cables with aluminum conductors insulated by PVC and with PVC sheath.

NAYY-J 0,66; 1 kV

Power cables with aluminum conductors insulated by PVC and with PVC sheath with low flammability.

Construction:

1. Current-carrying conductor – is made of aluminum, solid or stranded conductor, round- or sector-shaped, of class 1 or 2 as per GOST 22483.

2. Insulation is made of polyvinylchloride compound (PVC). Insulated conductors of multi-conductor cables have distinctive color. Insulation of neutral conductors is performed in blue color. Insulation of grounding conductors is performed in two colors (green and yellow).

3. Twist - insulated conductors  of two-, three- and four conductor cables are twisted; two conductor cables have uniform conductors; three- and four conductor cables have all uniform conductors or one conductor of lesser section (grounding or neutral conductor).

4. Inner sheath is made of unvulcanized rubber compound, in NAYY-J cables - unvulcanized rubber compound or of flame-resistant PVC compound with layer thickness of at least 0.1 mm.

5. Outer sheath is made of PVC compound, in NAYY-J cables - flame resistant PVC compound.

Application

– For power transmission and distribution in fixed plants for rated alternating voltage of 660 V and 1000 V with frequency of 50 Hz.
– For installation in dry and damp production spaces, on special cable racks, in blocks and for outdoor installation. For power supply to electric plants which need cable glands at bushing.

NAYY type cables are flame-retardant if single; NAYY-J type cables are flame-retardant if bunched.

NYM, 3 kV

Power cables with copper conductors insulated by PVC and with PVC sheath.

NYM-0,S07VV-R 3 kV

Power cables with copper conductors insulated by PVC and with PVC sheath with low flammability.

Construction:

1. Current-carrying conductor is made of copper, stranded conductor, round- or sector-shaped, of class 2 as per GOST 22483.

2. Insulation is made of polyvinylchloride compound (PVC). Insulated cable conductors of have distinctive color.

3. Twist - insulated cable conductors are twisted.

4. Inner sheath is moulded out with filling of gaps between conductors with unvulcanized rubber compound, in NYM-0,S07VV-R cables - with flame resistant unvulcanized rubber compound.

5. Metal screen consists of two copper tapes or copper foil.

6. Outer sheath is made of PVC compound, in NYM-0,S07VV-R cables - flame resistant PVC compound.

Application

– For power transmission and distribution in fixed plants for rated alternating voltage of 3 kV with frequency of 50 Hz.
– For installation in dry and damp production spaces, on special cable racks, in blocks and for outdoor installation.

NYM type cables are flame-retardant if single. NYM-0,S07VV-R type cables are flame-retardant if bunched.

NAYY 3 kV

Power cables with aluminum conductors insulated by PVC and with PVC sheath.

NAYY-J 3 kV

Power cables with aluminum conductors insulated by PVC and with PVC sheath with low flammability.

Construction:

1. Current-carrying conductor is made of aluminum, stranded conductor, round- or sector-shaped, of class 2 as per GOST 22483.

2. Insulation is made of polyvinylchloride compound (PVC). Insulated cable conductors have distinctive color.

3. Twist - insulated cable conductors are twisted.

4. Inner sheath is moulded out with filling of gaps between conductors with unvulcanized rubber compound, in NAYY-J cables - with flame resistant unvulcanized rubber compound.

5. Metal screen consists of two copper tapes or copper foil.

6. Outer sheath is made of PVC compound, NAYY-J cables - flame resistant PVC compound.

Application

– For power transmission and distribution in fixed plants for rated alternating voltage of 3 kV with frequency of 50 Hz.
– For installation in dry and damp production spaces, on special cable racks, in blocks and for outdoor installation.

NAYY type cables are flame-retardant if single. NAYY-J type cables are flame-retardant if bunched.
 

NYBY,NYRY 0,66; 1 kV

Power cables with copper conductors insulated by PVC, armored, jacketed by PVC.

NYRGbY,NYFGbY 0,66; 1 kV

Power cables with copper conductors insulated by PVC, armored, jacketed by PVC with low flammability.

CONSTRUCTION

1. Current-carrying conductor is made of copper, solid or stranded conductor, round- or sector-shaped, of class 1 or 2 as per GOST 22483.

2. Insulation is made of polyvinylchloride compound (PVC).
Insulated conductors of multi-conductor cables have distinctive color. Insulation of neutral conductors is performed in blue color. Insulation of grounding conductors is performed in two colors (green and yellow).

3. Twist - insulated conductors  of two-, three-, four- and five conductor cables are twisted; two conductor cables have uniform conductors; three-, four- and five conductor cables have all uniform conductors or one conductor of lesser section (grounding or neutral conductor).

4. Inner sheath - in NYBY,NYRY cables is moulded out of the PVC compound or unvulcanized rubber compound; in NYRGbY,NYFGbY cables - flame resistant PVC compound or flame resistant unvulcanized rubber compound.

5. Armor is made of two steel tapes overlaid in such a way that the top tape covers gaps between lays of the bottom tape. For single core cables armor is made of aluminum alloy tapes, in this case cables are marked as NYBY,NYRY and NYRGbY,NYFGbY.

6. Jacket - in NYBY,NYRY cables is made of PVC compound, in NYRGbY,NYFGbY cables - flame resistant PVC compound.

APPLICATION
– For power transmission and distribution in fixed plants for rated alternating voltage of 0.66 kV and 1 kV with frequency of 50 Hz.
– For installation in ground (trenches), premises, tunnels, channels, mines (except for installation in blocks), and outdoors, with cable not subjected to significant tensile force, but if there is a mechanical damage risk during operation.

NYBY,NYRY type cables are flame-retardant if single. NYRGbY,NYFGbY type cables are flame-retardant if bunched. 

Contacts:

32 Leskhozovskaya St, Stolbishche village,
Laishevo district, Republic of Tatarstan, 422624
Sales  department:
Tel.: (843) 227-51-62, 227-50-21, 227-51-89
Fax: (843) 227-50-21
Information center:
8-800-200-96-97
E-mail:tatkabel@inventunion.ru