Cable, electrical, foam pipe / Insulated pipes

 Branches for control conductors placing are divided into horizontal and vertical ones (route turns in the plane and in the profile). Standard angles of branches may be of four types - 90º, 60º, 45º, 30º. Branches with nonstandard elbow angles (from 3º to 90º) are also insulated.

 Example of reference designation of 90 degree branch with outside diameter of 57 mm, wall thickness of 3mm with insulation of type 1, of vertical (V) or horizontal (H) configuration:

 Branch St 57х3-90-1-FPU-PE(Galv)-B GOST 30732-2006 

Note:

1.     Branches may be produced with any angle and different leg size on request.

 Z-, П- Shaped Elements

Example of reference designation of Z-shaped element of 108 mm in diameter, with insulation of type 1:

Z-shaped element St 108-1-FPU-PE(Galv) GOST 30732—2006 

Example of reference designation of П-shaped element of 108 mm in diameter, with insulation of type 1:

П-shaped element St 108-1- FPU-PE(Galv) GOST 30732—2006

32 Leskhozovskaya St, Stolbishche village,
Laishevo district, Republic of Tatarstan, 422624
Sales department:
Tel./ Fax: (843) 227-43-62
E-mail: tti-com@rambler.ru

Обособленное подразделение г. Москва

г.Москва, ул.Минская, 1Г, корп.2
комплекс "Золотые ключи-2"

Тел: (495) 788 9732, (495) 788 9734, (495) 788 9736

E-mail:ttimostrade@inventunion.ru